Universiti Putra Malaysia Engineering

By | February 21, 2018


Universiti Putra Malaysia Engineering

Universiti Putra Malaysia Engineering,information on Universiti Putra Malaysia Engineering  can be seen below
 

Fakulti History
UPM’s Faculty Of Engineering, from its humble beginnings in 1975 was known as Faculty of Agricultural Engineering with only four departments and now has grown into one of the best engineering schools in Malaysia. To date, the Faculty has eight exciting departments offering eight Bachelor programs and 34 postgraduate programs, with combined enrollment of over 3000 for undergraduate and postgraduate students.

 

Undergraduate
Here, in the Faculty of Engineering, we are committed to excellence in education to produce individuals who are knowledgeable thinkers, creative, disciplined and able to adapt to any situation as well as serve the community and the nation through research and professional and community services. Actual performance as a student you will not only be measured by academic achievement, but also your Student Generic Attribute (GSA) envisaged by the university. Here you have to enhance various skills in communication, critical thinking and problem solving, teamwork, moral development and professional ethics, entrepreneurship, leadership and life-long learning.
 

PROGRAMME OFFERED
ADMISSION REQUIREMENT QUALIFICATION FOR UNDERGRADUATE PROGRAMS
a) Local Candidates
:: Matrikulasi Holder
:: STPM Holder
:: SPM Holder
:: Diploma Holder
b) International Candidates
:: Application Qualification Requirement
:: Specific Program Requirement     

LIST OF UNDERGRADUATE PROGRAMS OFFERED BY FACULTY OF ENGINEERING, UNIVERSITI PUTRA MALAYSIA  
1.Bachelor of Aerospace Engineering
2.Bachelor of Civil Engineering
3.Bachelor of Agricultural and Biosystems Engineering
4.Bachelor of Electrical and Electronic Engineering
5.Bachelor of Chemical Engineering
6.Bachelor of Mechanical Engineering
7.Bachelor of Process and Food Engineering
8.Bachelor of Computer and Communication Systems Engineering
Engineering Accreditation Council Malaysia (EAC) 
The Engineering Accreditation Council Malaysia (EAC) is a delegated body by the Board of Engineers Malaysia (BEM) as the only recognized accrediting body for engineers degree programmes offered in Malaysia. Until now, EAC has recognized 190 programmes in 26 higher education institutions (IPT) throughout the country.
BEM has prescribed that one of the condition for engineering graduates to registered as a Graduate or Professional Engineer to possess bachelor of engineering that recognized by EAC. It is a mistake for practicing the engineering in Malaysia without registering with BEM as Graduate or Professional Engineer. All those eight (8) programmes of bachelor offered in Faculty of Engineering has been recognized by EAC.
Postgraduate
Faculty of Engineering are pleased to invite all qualified candidates to pursue your professional level of education in Masters and Doctorate programs. We offer both Master with Thesis and Without Thesis in various engineering fields.
Faculty of Engineering offers 36 fields 
of postgraduate studies as follow :

  1. Aerospace Engineering
  2. Agricultural Mechanisation and Automation
  3. Agricultural Process Engineering
  4. Agricultural Waste Engineering
  5. Automotive Engineering
  6. Biochemical Engineering
  7. Biomedical Engineering
  8. Chemical Engineering
  9. Computational Methods in Engineering
  10. Computer and Embedded Systems Engineering
  11. Computer Networks
  12. Control System Engineering
  13. Electrical Power Engineering
  14. Electronic Engineering
  15. Environmental Engineering
  16. Farm Structures
  17. Food Engineering
  18. Geographic Information System (GIS)
  19. Geospatial Engineering
  20. Geotechnical and Geological Engineering
  21. Highway and Transportation Engineering
  22. Industrial Engineering
  23. Manufacturing Systems Engineering
  24. Materials Engineering
  25. Mechanical Engineering
  26. Packaging Engineering
  27. Photonics Engineering
  28. Project Management
  29. Remote Sensing
  30. Safety, Health and Emergency Management
  31. Sensor Technology
  32. Signal Processing
  33. Soil and Water Engineering
  34. Structural Engineering
  35. Water Resources Engineering
  36. Wireless Communications and Networks Engineering
Internship/Industrial Training
Introduction
Industrial training is an extremely important and valuable asset in the teaching and learning process. A well planned and organized industrial training provides an added value to the students, as they are exposed to the on-job training and real life job experience.
The training is carried out and evaluated based on the course outcomes as outlined by the Faculty. It is important to let the students, visiting lecturers and the supervisor at the training place aware of the course outcomes and the objectives of the industrial training. Thus, the industrial training is a compulsory course for all students as part of the fulfillment in Bachelor of Engineering program. The duration of the training shall be 10 weeks.
Mobiliti Programme
For more information and further enquiries please contact:
Head of Alumni, Relations & Mobility
Dr. Syazwani Idrus
Head of Alumni, Relations & Mobility
Faculty of Engineering Universiti Putra Malaysia
43400 UPM Serdang,
Selangor Darul Ehsan, Malaysia.
Tel: +603-8946 4467
E-mail: syazwani@upm.edu.my
APPLICATION FOR INDUSTRIAL TRAINING EXAMPTION
CATATAN (Notes):
(PERMOHONAN PENGECUALIAN LATIHAN INDUSTRI)
Borang yang lengkap beserta laporan yang disahkan oleh pelajar dan majikan hendaklah dimajukan kepada
Penyelaras untuk penelitian dan pengesahan beliau berdasarkan format laporan yang diperakukan oleh Fakulti
selewat-lewatnya semester ke-2 pengajian.
(A completed form with attached report certified by the student and the employer must be forwarded to the Coordinator
for his/her scrutinizing and verification based on the report format that is specified by the Faculty at the latest during
the second semester of study).
1. Nama Pelajar
(Name of Student)
2. No. Matriks
(Matric No.)
3. Program Pengajian
(Study Programme)
4. Sesi Pengajian
(Study Session)
5. Semester Sekarang
(Current Semester)
6. Jika pernah bekerja, nyatakan nama jawatan
(Previous Job Title, If Applicable)
7. Tempat pekerjaan
(Place of Employment)
8. Jenis-jenis kerja dan jangkamasa
(Types of Employment and Duration)
9. Maklumat lain (jika ada)
(Other Information (if any))
Ulasan dan Pengesahan Penyelaras (Coordinator’s Remark and Verification):
Saya telah meneliti laporan yang disediakan dan bersetuju bahawa pelajar di atas boleh dipertimbangkan untuk
pengecualian dari menjalankan latihan industri.
_______________________________________________________
Tandatangan Penyelaras Latihan Industri dan Cap rasmi
(Signature of Industrial Training Coordinator and Official Stamp)
Tarikh (Date) :
LATIN05
2 drp. 2
Ulasan dan Pengesahan:
(Comments and Approval):
Permohonan disokong / tidak disokong
(Application supported/ nor supported)
_____________________________________________________
Tandatangan Ketua Jabatan dan Cap rasmi
(Signature of Head of Department and Official Stamp)
Tarikh (Date) :
Keputusan :
(Result)
[ ]
[ ]
Permohonan diluluskan
(Applications Approved)
Permohonan tidak diluluskan
(Application not Approved)
Alasan:
(Comments)
_________________________________________________
Tandatangan Timbalan Dekan (Pengajian Prasiswazah) dan Cop rasmi
ISignature of Deputy Dean (Undergraduate Studies) and Official Stamp)
Tarikh (Date) :
FACULTY OF ENGINEERING
Dean,
Faculty of Engineering,
Universiti Putra Malaysia,
43400 UPM Serdang,
Selangor Darul Ehsan.
Malaysia.
0389466262
0386567099
dean.eng@upm.my